After the pouring is completed the crucible is laid on its' side so that any remaining metal can cool and solidify on the side of the crucible. If the crucible was left upright and the metal cooled in the bottom when it was next re-heated when the aluminum started to expand with the heat it might crack the crucible.
Previous Picture
43
of 52 
Next Picture
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 26A 26B
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49 50 51 52
Return to First Page of This Set