Before the pour can start the "dross" must be skimmed off the surface of the melt. Dross is impurities from the metal that collects at the surface of the molten metal. If not removed it can cause inclusions in the casting which weaken the finished product and can make machining more difficult.
Previous Picture 40
of 52
Next Picture
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 26A 26B
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49 50 51 52
Return to First Page of This Set