Our first stop was Fazzio's, a hardware, aluminum, steel, used machinery wonderland near Galssboro NJ. Excellent directions were provided by Joe Schulte the diving force behind the NJLLOF. That is the New Jersey Logan Lathe Owners Group.
From the Northern part of NJ.
Take the New Jersey Turnpike SOUTH to exit #7 or as far down as Exit #4. We want
to get you onto Route 295 SOUTH (toll free) which runs parallel with the NJ.Tpke
SOUTH from exit#7 down to exit#4. You save
money getting off the NJ Tpke SOUTH at exit #7 onto Rt#295 South.Take Route 295
SOUTH to Route 42 (which is below NJ.Tpke Exit #4) Continue SOUTH/EAST on Route
42 to the Atlantic City Expressway.
Take Atlantic City Expressway EAST to Exit #41 Turn RIGHT at the top of the exit
ramp onto Route #689 SOUTH.
You will be heading SOUTH on Route # 689 and this is also called Glassboro-Cross
Keys Rd. Go SOUTH from the A/C Expressway on Route #689 approx 5 traffic
lights to #2760 Glassboro-Cross Keys Rd. (on the right is FAZZIO'S)
Joseph Fazzio Inc.
2760 Glassboro-Cross Keys Rd & Pitman-Downer Rd
Glassboro N.J. 08028
856-881-3185
From Toms River NJ. and the NJ. Seashore areas
Take the Garden State Parkway SOUTH to the Atlantic City
expressway and head WEST until
Exit #41 Turn LEFT off exit ramp onto Route # 689 SOUTH and then proceed
as
outlined above for Route #689.
From Conn.& Yonkers
Take NJ.Tpke (RT. 95 SOUTH from GW Bridge) and follow above
directions as if starting from Northern NJ.
Cook's Machinery & Tool
683 Sicklerville Rd
Sicklerville NJ. 08081
856-629-4900
Take Rt. #689 NORTH back over the Atlantic City Expressway and go to the first
traffic light beyond the intersection of the Expressway and Rt.#689. This is
Sicklerville Rd. Turn RIGHT and go 1/8 mile to Cook's on the right. They have a
small sign in front, they sit back from the road so drive into the rear lot.
I have included the directions here since there may be someone who will feel the burning need to jump i the car and head to Fazzio's.
